[General] VoIP For Home Usage
Faisal AlAbhoul
kuwait at q8net.com
Thu Aug 6 21:41:03 +03 2009
Easy, just change the wall socket, you can join 4-wires together in the wall socket itself to be powered by the line voltage itself. Dont try it unless you update the "kw" settings which Majed thankfully saved me from searching. Was going to get the settings from my Trixbox but unfortunately i cant SSH into my Trixbox, its a blackbox in my home network and heavily jailed.
--- On Thu, 6/8/09, Majed B. <majedb at gmail.com> wrote:
From: Majed B. <majedb at gmail.com>
Subject: Re: [General] VoIP For Home Usage
To: "General OpenSource Discussion" <general at oskw.org>
Date: Thursday, 6 August, 2009, 9:32 PM
@@ !!
What if all the sockets have 2 wires only?!?!
On Thu, Aug 6, 2009 at 9:30 PM, Faisal AlAbhoul<kuwait at q8net.com> wrote:
> Oh you using Asterisk 1.6? the Ring/Disconnect tones should not change,
> thats strange. I'll send you the "kw" tone settings soon.
>
> Did you try using 4-wires RJ11 socket instead of 2-wires? provided the
> socket on the wall also 4-wires. i dont know why but it i remember that
> helped with my TDM400P.
>
>
>
> --- On Thu, 6/8/09, Ahmad Al-Ibrahim <ahmad at koutbo6.com> wrote:
>
> From: Ahmad Al-Ibrahim <ahmad at koutbo6.com>
> Subject: Re: [General] VoIP For Home Usage
> To: "General OpenSource Discussion" <general at oskw.org>
> Date: Thursday, 6 August, 2009, 9:23 PM
>
> Thanks Bo Rashed,
>
> I've tried that without luck, I think I'm going to re-install.
>
> Dahdi is still Starting/Hanging up every second.
>
> Regards,
>
> Ahmad Al-Ibrahim
>
> Faisal AlAbhoul wrote:
>> Set the tone to Germany, it matches Kuwait perfectly.
>>
>>
>> --- On *Tue, 4/8/09, Ahmad Al-Ibrahim /<ahmad at koutbo6.com>/* wrote:
>>
>>
>> From: Ahmad Al-Ibrahim <ahmad at koutbo6.com>
>> Subject: Re: [General] VoIP For Home Usage
>> To: "General OpenSource Discussion" <general at oskw.org>
>> Date: Tuesday, 4 August, 2009, 4:16 AM
>>
>> I have configured the trunks, inbound routes, zap channels. It seems
>> to
>> be something related to the line it self or the configurations to
>> match
>> Kuwait PSTN tones, are you able to call the land line? and do you see
>> debug information on asterisk CLI while calling the land line? What is
>> the 'country' variable value in indications.conf, 'loadzone' and
>> 'defaultzone' variables values in zaptel.conf?
>>
>> Having a cronjob wont harm your system, atleast it works.
>>
>> I've already saw this link in the morning, I dont have acpi variable
>> set
>> in grub.conf.
>>
>> Regards,
>>
>> Ahmad Al-Ibrahim
>>
>> Majed B. wrote:
>> > I was just about to email and ask you how things are going on your
>> end! hahaha.
>> >
>> > Well, seems like I wasn't the only one going through trouble...
>> >
>> > Have you configured the trunk, made sure the Outbound route is using
>> > that trunk, and that you have configured a general Inbound route?
>> Did
>> > you configure an extension to receive/make calls?
>> >
>> > I know it sounds silly, but go over them again and try recreating
>> the
>> > extension or make a new one and divert the inbound calls to it.
>> >
>> > I'll look around and see what could cause your problems.
>> >
>> > As for my side, remember that NAT & externip thing? It worked for a
>> > while, when asterisk wanted it to, then it broke. If in the home
>> page
>> > the value "Public IP" is "Unknown" then you can kiss your audio good
>> > bye on any device outside the LAN from receiving audio. I'm too
>> close
>> > to stab someone in the face... it's quite frustrating because my
>> > settings should work, and I don't want to run a script with a cron
>> job
>> > to replace the domain name with the IP :/
>> >
>> > On Tue, Aug 4, 2009 at 3:10 AM, Ahmad Al-Ibrahim<ahmad at koutbo6.com
>> </mc/compose?to=ahmad at koutbo6.com>> wrote:
>> >> Majed,
>> >>
>> >> I've installed OpenVox card, ran setup-pstn, the card was
>> detected and
>> >> configured, but I'm having problems, not sure what else needs to
>> be done.
>> >>
>> >> I keep getting lots of
>> >>
>> >> -- Hungup 'DAHDI/1-1'
>> >> -- Starting simple switch on 'DAHDI/1-1'
>> >> -- Hungup 'DAHDI/1-1'
>> >> -- Starting simple switch on 'DAHDI/1-1'
>> >> -- Hungup 'DAHDI/1-1'
>> >> -- Starting simple switch on 'DAHDI/1-1'
>> >>
>> >>
>> >> messages in asterisk console when the line is connected behind an
>> ADSL
>> >> splitter, and when i call the land line number the phone rings,
>> pick up
>> >> and hangups every second simultaneously with the messages above.
>> I've
>> >> removed the ADSL splitter and connected the line directly to the
>> box, I
>> >> keep getting busy tone.
>> >>
>> >> Do I have to configure the device specifically for Kuwait PSTN
>> tones?
>> >>
>> >> BTW Dahdi is zaptel in Asterisk 1.6
>> >>
>> >> Regards,
>> >>
>> >> Ahmad Al-Ibrahim
>>
>> _______________________________________________
>> General mailing list
>> General at oskw.org </mc/compose?to=General at oskw.org>
>> http://oskw.org/mailman/listinfo/general_oskw.org
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> General mailing list
>> General at oskw.org
>> http://oskw.org/mailman/listinfo/general_oskw.org
>
> _______________________________________________
> General mailing list
> General at oskw.org
> http://oskw.org/mailman/listinfo/general_oskw.org
>
> _______________________________________________
> General mailing list
> General at oskw.org
> http://oskw.org/mailman/listinfo/general_oskw.org
>
>
--
Majed B.
_______________________________________________
General mailing list
General at oskw.org
http://oskw.org/mailman/listinfo/general_oskw.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://oskw.org/pipermail/general_oskw.org/attachments/20090806/3d454b2b/attachment.html>
More information about the General
mailing list