[General] VoIP For Home Usage

[Ahmad Al-Ibrahim]

Majed, I went through most of the articles, my case is th last and the
worst case, where asterisk is behind NAT, and the mobile is behind NAT
in other network.

tcpdump shows RTP packets sent from asterisk to the mobile without a
response from the mobile.

Regards,

Ahmad Al-Ibrahim

Majed B. wrote:
> Ahmad, the issue has already been addressed before and is documented
> with solutions. The first 3 hits should have the proper solution for
> you/us:
> 
> http://www.google.com/search?q=asterisk+nat
> 
> Let me know which one works out!
> 
> I just installed IPcop on my HP T5700 ThinClient (which has support
> for my SpeedTouch USB DSL Modem)!!! So I should be able to get
> Asterisk running online in 2 days or so. Inshallah....
> 
> On Fri, Jul 31, 2009 at 3:58 AM, Ahmad Al-Ibrahim<ahmad at koutbo6.com> wrote:
>> Majed,
>>
>> Yes, that was the first thing I've tried without success, after that I
>> configured the PBX to be on DMZ. I will let you know once it is solved.
>>
>> Regards,
>>
>> Ahmad Al-Ibrahim
>>
>> Majed B. wrote:
>>> Ahmad: Did set port-forwarding rules from your gateway to Asterisk?
>>> According to what I read, these ports should be redirected to the
>>> Asterisk box:
>>>
>>> 5060 (tcp/udp)
>>> 10000-20000 (udp)
>>>
>>> On Fri, Jul 31, 2009 at 3:31 AM, Faisal AlAbhoul<kuwait at q8net.com> wrote:
>>>> Thats the drawbacks of SIP 2.0 over NAT. Try to use IAX2 protocol, its very
>>>> NAT-Friendly but hardly any software clients for mobile phones support IAX
>>>> or IAX2.
>>>>
>>>> I see you didnt install G729, you can download the opensource G729 and
>>>> simply place it in modules directory. The G711 is actually the alaw and ulaw
>>>> codec, perfect for LAN telephony and FAX over VoIP.
>> _______________________________________________
>> General mailing list
>> General at oskw.org
>> http://oskw.org/mailman/listinfo/general_oskw.org
>>
> 
> 
>