[General] VoIP For Home Usage
Ahmad Al-Ibrahim
ahmad at koutbo6.com
Thu Aug 6 21:37:20 +03 2009
Bo Rashed, Yes I'm using Asterisk 1.6.
I have 4-wires RJ11 socket, do I have to use 2-wires RJ11 socket? is
there 2-wires RJ11 in the market? or do I have to do them manually? what
about the wall the should it be 4 or 2 wires?
Regards,
Ahmad Al-Ibrahim
Faisal AlAbhoul wrote:
> Oh you using Asterisk 1.6? the Ring/Disconnect tones should not change,
> thats strange. I'll send you the "kw" tone settings soon.
>
> Did you try using 4-wires RJ11 socket instead of 2-wires? provided the
> socket on the wall also 4-wires. i dont know why but it i remember that
> helped with my TDM400P.
>
>
>
> --- On *Thu, 6/8/09, Ahmad Al-Ibrahim /<ahmad at koutbo6.com>/* wrote:
>
>
> From: Ahmad Al-Ibrahim <ahmad at koutbo6.com>
> Subject: Re: [General] VoIP For Home Usage
> To: "General OpenSource Discussion" <general at oskw.org>
> Date: Thursday, 6 August, 2009, 9:23 PM
>
> Thanks Bo Rashed,
>
> I've tried that without luck, I think I'm going to re-install.
>
> Dahdi is still Starting/Hanging up every second.
>
> Regards,
>
> Ahmad Al-Ibrahim
>
> Faisal AlAbhoul wrote:
> > Set the tone to Germany, it matches Kuwait perfectly.
> >
> >
> > --- On *Tue, 4/8/09, Ahmad Al-Ibrahim /<ahmad at koutbo6.com
> </mc/compose?to=ahmad at koutbo6.com>>/* wrote:
> >
> >
> > From: Ahmad Al-Ibrahim <ahmad at koutbo6.com
> </mc/compose?to=ahmad at koutbo6.com>>
> > Subject: Re: [General] VoIP For Home Usage
> > To: "General OpenSource Discussion" <general at oskw.org
> </mc/compose?to=general at oskw.org>>
> > Date: Tuesday, 4 August, 2009, 4:16 AM
> >
> > I have configured the trunks, inbound routes, zap channels. It
> seems to
> > be something related to the line it self or the configurations
> to match
> > Kuwait PSTN tones, are you able to call the land line? and do
> you see
> > debug information on asterisk CLI while calling the land line?
> What is
> > the 'country' variable value in indications.conf, 'loadzone' and
> > 'defaultzone' variables values in zaptel.conf?
> >
> > Having a cronjob wont harm your system, atleast it works.
> >
> > I've already saw this link in the morning, I dont have acpi
> variable set
> > in grub.conf.
> >
> > Regards,
> >
> > Ahmad Al-Ibrahim
> >
> > Majed B. wrote:
> > > I was just about to email and ask you how things are going
> on your
> > end! hahaha.
> > >
> > > Well, seems like I wasn't the only one going through trouble...
> > >
> > > Have you configured the trunk, made sure the Outbound route
> is using
> > > that trunk, and that you have configured a general Inbound
> route? Did
> > > you configure an extension to receive/make calls?
> > >
> > > I know it sounds silly, but go over them again and try
> recreating the
> > > extension or make a new one and divert the inbound calls to it.
> > >
> > > I'll look around and see what could cause your problems.
> > >
> > > As for my side, remember that NAT & externip thing? It
> worked for a
> > > while, when asterisk wanted it to, then it broke. If in the
> home page
> > > the value "Public IP" is "Unknown" then you can kiss your
> audio good
> > > bye on any device outside the LAN from receiving audio. I'm
> too close
> > > to stab someone in the face... it's quite frustrating because my
> > > settings should work, and I don't want to run a script with
> a cron job
> > > to replace the domain name with the IP :/
> > >
> > > On Tue, Aug 4, 2009 at 3:10 AM, Ahmad
> Al-Ibrahim<ahmad at koutbo6.com </mc/compose?to=ahmad at koutbo6.com>
> > </mc/compose?to=ahmad at koutbo6.com
> </mc/compose?to=ahmad at koutbo6.com>>> wrote:
> > >> Majed,
> > >>
> > >> I've installed OpenVox card, ran setup-pstn, the card was
> > detected and
> > >> configured, but I'm having problems, not sure what else
> needs to
> > be done.
> > >>
> > >> I keep getting lots of
> > >>
> > >> -- Hungup 'DAHDI/1-1'
> > >> -- Starting simple switch on 'DAHDI/1-1'
> > >> -- Hungup 'DAHDI/1-1'
> > >> -- Starting simple switch on 'DAHDI/1-1'
> > >> -- Hungup 'DAHDI/1-1'
> > >> -- Starting simple switch on 'DAHDI/1-1'
> > >>
> > >>
> > >> messages in asterisk console when the line is connected
> behind an
> > ADSL
> > >> splitter, and when i call the land line number the phone rings,
> > pick up
> > >> and hangups every second simultaneously with the messages
> above. I've
> > >> removed the ADSL splitter and connected the line directly
> to the
> > box, I
> > >> keep getting busy tone.
> > >>
> > >> Do I have to configure the device specifically for Kuwait
> PSTN tones?
> > >>
> > >> BTW Dahdi is zaptel in Asterisk 1.6
> > >>
> > >> Regards,
> > >>
> > >> Ahmad Al-Ibrahim
> >
> > _______________________________________________
> > General mailing list
> > General at oskw.org </mc/compose?to=General at oskw.org>
> </mc/compose?to=General at oskw.org </mc/compose?to=General at oskw.org>>
> > http://oskw.org/mailman/listinfo/general_oskw.org
> >
> >
> >
> ------------------------------------------------------------------------
> >
> > _______________________________________________
> > General mailing list
> > General at oskw.org </mc/compose?to=General at oskw.org>
> > http://oskw.org/mailman/listinfo/general_oskw.org
>
> _______________________________________________
> General mailing list
> General at oskw.org </mc/compose?to=General at oskw.org>
> http://oskw.org/mailman/listinfo/general_oskw.org
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> General mailing list
> General at oskw.org
> http://oskw.org/mailman/listinfo/general_oskw.org
More information about the General
mailing list