[General] VoIP For Home Usage

[Majed B.]

Faisal,

Do we do that from the web ui by just selecting the country, or changing the
zone options from "us" to "de" ?

On Thu, Aug 6, 2009 at 8:16 PM, Faisal AlAbhoul <kuwait at q8net.com> wrote:

> Set the tone to Germany, it matches Kuwait perfectly.
>
>
> --- On *Tue, 4/8/09, Ahmad Al-Ibrahim <ahmad at koutbo6.com>* wrote:
>
>
> From: Ahmad Al-Ibrahim <ahmad at koutbo6.com>
> Subject: Re: [General] VoIP For Home Usage
> To: "General OpenSource Discussion" <general at oskw.org>
> Date: Tuesday, 4 August, 2009, 4:16 AM
>
>
> I have configured the trunks, inbound routes, zap channels. It seems to
> be something related to the line it self or the configurations to match
> Kuwait PSTN tones, are you able to call the land line? and do you see
> debug information on asterisk CLI while calling the land line? What is
> the 'country' variable value in indications.conf, 'loadzone' and
> 'defaultzone' variables values in zaptel.conf?
>
> Having a cronjob wont harm your system, atleast it works.
>
> I've already saw this link in the morning, I dont have acpi variable set
> in grub.conf.
>
> Regards,
>
> Ahmad Al-Ibrahim
>
> Majed B. wrote:
> > I was just about to email and ask you how things are going on your end!
> hahaha.
> >
> > Well, seems like I wasn't the only one going through trouble...
> >
> > Have you configured the trunk, made sure the Outbound route is using
> > that trunk, and that you have configured a general Inbound route? Did
> > you configure an extension to receive/make calls?
> >
> > I know it sounds silly, but go over them again and try recreating the
> > extension or make a new one and divert the inbound calls to it.
> >
> > I'll look around and see what could cause your problems.
> >
> > As for my side, remember that NAT & externip thing? It worked for a
> > while, when asterisk wanted it to, then it broke. If in the home page
> > the value "Public IP" is "Unknown" then you can kiss your audio good
> > bye on any device outside the LAN from receiving audio. I'm too close
> > to stab someone in the face... it's quite frustrating because my
> > settings should work, and I don't want to run a script with a cron job
> > to replace the domain name with the IP :/
> >
> > On Tue, Aug 4, 2009 at 3:10 AM, Ahmad Al-Ibrahim<ahmad at koutbo6.com<http://mc/compose?to=ahmad@koutbo6.com>>
> wrote:
> >> Majed,
> >>
> >> I've installed OpenVox card, ran setup-pstn, the card was detected and
> >> configured, but I'm having problems, not sure what else needs to be
> done.
> >>
> >> I keep getting lots of
> >>
> >>    -- Hungup 'DAHDI/1-1'
> >>    -- Starting simple switch on 'DAHDI/1-1'
> >>    -- Hungup 'DAHDI/1-1'
> >>    -- Starting simple switch on 'DAHDI/1-1'
> >>    -- Hungup 'DAHDI/1-1'
> >>    -- Starting simple switch on 'DAHDI/1-1'
> >>
> >>
> >> messages in asterisk console when the line is connected behind an ADSL
> >> splitter, and when i call the land line number the phone rings, pick up
> >> and hangups every second simultaneously with the messages above. I've
> >> removed the ADSL splitter and connected the line directly to the box, I
> >> keep getting busy tone.
> >>
> >> Do I have to configure the device specifically for Kuwait PSTN tones?
> >>
> >> BTW Dahdi is zaptel in Asterisk 1.6
> >>
> >> Regards,
> >>
> >> Ahmad Al-Ibrahim
>
> _______________________________________________
> General mailing list
> General at oskw.org <http://mc/compose?to=General@oskw.org>
> http://oskw.org/mailman/listinfo/general_oskw.org
>
>
> _______________________________________________
> General mailing list
> General at oskw.org
> http://oskw.org/mailman/listinfo/general_oskw.org
>
>


-- 
      Majed B.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://oskw.org/pipermail/general_oskw.org/attachments/20090806/9a05eccc/attachment.html>