[General] MTC E-go Device (and others) Under Linux

[JaBeR MoH.]

السلام عليكم

يعطيك الف عافيه .. ومشكور على هالموضوع .. 

جربت البرنامج ونزل عندي على الجهاز وكل شي اوكي
حتى اني ارسلت اس ام اس من الجهاز لي تيلفون واشتغل ما عدا الانترنت ماقدرت اشبك من القطعه شنو السبب ما قدرت اعرف

مع العلم ان في اشاره لوجود الشبكه بس كل ما اضغط على اتصال .. مايصير شي وﻻ يشبك :)

وشكرا
----------------------------------------
> Date: Sun, 9 Mar 2008 16:42:07 +0300
> From: burhan at kuwaitnet.net
> To: general at oskw.org
> Subject: [General] MTC E-go Device (and others) Under Linux
> 
> Salaam All:
> 
>    I wrote this a while go for an internal company mailing list, but I 
> thought it might be worth sharing:
> 
>   To make this device work in Linux, follow these steps:
> 
>   1. Download the appropriate package files for your distribution from 
> https://forge.vodafonebetavine.net/frs/?group_id=12&release_id=11
> 
>      Packages are available for Ubuntu Fiesty, Ubuntu Edgy, SLED 10, 
> FC7. Source code is also available (under GPL). If you want to compile 
> from source, you will need the following additional packages (and their 
> -dev components) on your system:
> 
>      python python-dbus python-twisted python-serial python-glade2 
> python-pysqlite2 wvdial nozomi-source python-notify python-gnome2-extras
> 
>   2. Start the application (vodafone-mobile-connect-card-driver-for-linux)
> 
>   3. Plug in your device and WAIT. You have to wait for a minimum of 2 
> minutes before the device properly registers with dbus. You can monitor 
> the progress by tail -f /var/log/messages (or view the output of dmesg). 
> The light should stop blinking on the device once it is registered 
> properly. You should see something similar to this in your logs:
> 
>    usb 1-2: new full speed USB device using uhci_hcd and address 2
>    usb 1-2: configuration #1 chosen from 1 choice
>    usb-storage: device ignored
>    usbcore: registered new interface driver usbserial
>    drivers/usb/serial/usb-serial.c: USB Serial support registered for 
> generic
>    usbcore: registered new interface driver usbserial_generic
>    drivers/usb/serial/usb-serial.c: USB Serial Driver core
>    drivers/usb/serial/usb-serial.c: USB Serial support registered for 
> GSM modem (1-port)
>    option 1-2:1.0: GSM modem (1-port) converter detected
>    usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
>    usbcore: registered new interface driver option
>    drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
> 
> 4. You will get a notification message that a new device has been 
> detected by the vodafone dialer application. Accept the defaults for the 
> device (it will detect it correctly). You will see your network provider 
> and signal strength in the status bar of the application.
> 
> 5. Settings; I only have settings for MTC (and half settings for 
> Wataniya). Call 121 if you have a Wataniya SIM. Go to Tools> 
> Preferences and change as follows:
> 
>     MTC:
>        Username: hspss
>        Password: hspss
>        APN: hspss
> 
>     Wataniya:
>        Username: ???
>        Password: ???
>        APN: action.wataniya.com
>       I recommend you use static DNS, as sometimes the DNS received by 
> the system is unreachable. You can use 208.67.222.222 and 208.67.220.220 
> as DNS.
> 
> 6. After saving the settings, click on Connect. Wait a second or two, 
> and the system will connect. Note: when you do this, all default routes 
> are disconnected. So don't do this while you are SSH'd into a server 
> running some script. It might cause problems. You'll get output like 
> below in your log:
> 
>    pppd[24431]: pppd 2.4.4 started by burhan, uid 1000
>    pppd[24431]: Using interface ppp0
>    pppd[24431]: Connect: ppp0 <--> /dev/ttyUSB0
>    pppd[24431]: Warning - secret file /etc/ppp/pap-secrets has world 
> and/or group access
>    pppd[24431]: Warning - secret file /etc/ppp/chap-secrets has world 
> and/or group access
>    pppd[24431]: CHAP authentication succeeded
>    pppd[24431]: CHAP authentication succeeded
>    pppd[24431]: Could not determine remote IP address: defaulting to 
> 10.64.64.64
>    pppd[24431]: replacing old default route to eth0 [192.168.0.1]
>    pppd[24431]: local  IP address 10.177.75.84
>    pppd[24431]: remote IP address 10.64.64.64
>    pppd[24431]: primary   DNS address 10.11.12.13
>    pppd[24431]: secondary DNS address 10.11.12.14
>    pppd[24431]: Terminating on signal 15
>    pppd[24431]: Connect time 1.1 minutes.
>    pppd[24431]: Sent 5039 bytes, received 96 bytes.
>    pppd[24431]: restoring old default route to eth0 [192.168.0.1]
>    pppd[24431]: Connection terminated.
>    pppd[24431]: Exit.
> 
> 7. There is no step 7. Click and Enjoy :) I accept donations in filafil 
> or shawarmas :P

_________________________________________________________________
Connect and share in new ways with Windows Live.
http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_012008